fish feed pellet machine makes high quality fish feed pellets

Quality of Fish Feed

The quality of fish feed identifies the particular nutritionary in addition to the real attributes on the feed that will help it become consumed as well as digested because of the fish.
The actual fish feed must contain each of the vitamins needed because of the fish, inside appropriate amounts for great functionality (growth as well as health).The specific nutritional requirements pertaining to fish range with all the fish’s sizing as well as reproductive system condition.The actual vitamins within the feed should also always be easily accessible for the fish and grow digestible.

Fish Feed Pellet Machine Structure

Floating feed pellet machine mainly consists of feeding system, extruding system, cutting system, heating system and controlling system. this feed pellet making machine is adopted international advanced structure, the floating fish feed pellet machine is equipped with impeller feeder, advanced frequency convertor and magnetic device for uniform feeding and reliable operating. The water drop grinding chamber of the pellet machine can eliminate material circulation so as to increase working efficiency.

Fish Feed Pellet Machine Working Principle

The puffed fish feed mill can be divided into three stages: Feeding stage, conveying stage and the forming stage. The materials crushed by a feed grinder first enter into the feeding section, then by the thrust of screw shaft, they will go into the conveying section. During the chamber, the material is strongly impacted by the high speed rotating shaft and fully cooked by the heating system. Finally, the material is extruded through extrusion die, at the moment, the pressure release to normal suddenly and the pellets are expanded into a puffed form.

cheap floating fish feed pellet mill is used to make fish forage

floating fish feed pellet mill

Floating fish feed pellet mill also can be called puffing machine. floating fish feed pellet mill is mainly making feed pellets for fish, plankton or pet. The working principle is puffing the raw materials our of the die under high temperature. As there are round holes on the die, so the feed pellet machine is strip when the raw materials come out of the holes. The working principle of it is totally different with the flat die or ring die pellet mill. For the final floating fish feed pellets, the diameter of them can be 0.9-10mm according to your request.  If the ratio of starch in the raw materials higher than 30%, then the final pellets can floating above water for 12-36 hours. 

Application and Features of floating fish feed pellet mill

1.fish feed pellet mill(floating pellet)can make floating feed pellets for kinds of fish, shrimps .etc. 

2.The final pellets can keep floating for 3-15 hours without pollution to water.
3.The floating time can be controlled by the puffing degree.
4.Floating fish feed pellet mill can make pellet from dia.1.0mm-20mm just by changing the mold.
5.Electric heating device can improve the feed expansion rate and pellets floating time.

Why will choose floating feed pellet mill to make fish feed ? 
1) the pellet making machine has high capacity
2) Can connect with steam boiler make pellet nutritions
3)Many models for choice

feed pellet mill to make feed pellets to increase nutrient for animal

feed pellet mill

feed Pellet mill is the most common method of making animal feed pellets. feed pellet mill is used for substantial reduction in particle size of feed in order to improve feed digestibility, acceptability and mixing properties. The crushed feed like corn,wheat,soybean,rice husk,with feed hammer mill, can be extruded into pellets which is increased in bulk density and improved in quality the nutrient for animal. Feed milling carried out by using the feed milling equipment is the cheapest process to increase the exposure of feed to digestive juices of the livestock, and the livestock can absorb the ingredients in the feed better.

feed pellet mill

In poultry diets, the effects of diet particle size are very significant. Feed efficiency is improved by reducing the pellet size in simple diets . so, people start using poultry feed pellet making machine to produce the poultry feed pellets. The poultry feed pellet mill is now widely used for processing feed in order to achieve high feed efficiency and saving the cost. Feed can be processed according to special formula, and the processed feed can be fully digested by the poultry. What's more, feed safety can be well controlled by using poultry feed pellet mill.
The animal feeds pellets that are produced using such a pellet making mill machine are easy to digest. They won’t give your animals any problem The pellets produced by this system will not condone animal piddling; it will eliminate this problem instead. it is much easier to control the nutrition of the animals using the feed produced by this feed pellet mill

mini chaff cutter machine,chaff cutter manufacturer

introduction of mini chaff cutter

1.The mini chaff cutter is used to crush kinds of straw with good quality and high capacity .the mini chaff cutter is application of new structural design, so that further reduce power consumption (with their peers compared to the same types of products),cutting feeding and reliable, sturdy, and durable ,long life and other advantages cutter.
2.the mini chaff cutter is Used for cutting dry corn stalk, grass, peanut stalk, and so on. Suitable for cow or sheep eating.
as chaff cutter manufacturer,we Designed and developed using technological advancements, electric operated chaff cutter is highly precised machine and are smooth to operate. Impeccably designed, these chaff cutters are useful for chopping up hay and oat-straw to feed livestock and prepare fine raw material for food processing industries. The technical specifications of the equipment are tabulated as follows

Type	Capacity(t/h)	Power(kw)	Overall Dimension (L*W*H) (mm)	Weight(t)
9Z-12.0C	12	18.5	2950x2160x1900	1.35
9Z-10.0C	10	15	2750x2050x1800	1.05
93Z-8.0C	8	11	1970x950x1800m	0.63
9Z-5.0C	5	7.5	1400x930x1720m	0.55
9Z-3.0C	3	5.5	1240x770x1600m	0.32
9Z-2.0C	2	4	1130x670x1400m	0.2
9Z-1.5C	1.5	3	1050x600x1250m	0.16
9Z-0.4	0.4	2.2	850x500x1000m	0.10

Main features of mini chaff cutter:

A. the mini chaff cutter has Steel structure , small volume, small and night , easy movement

B. Devising safety appliance, deracinating , safety and reliable

C. Grass roller shaft universal coupling selection, Compact structure ,easy operation ,easy assembly

D. Supporting dynamic and diverse selection , also supporting motor,diesel engine,tractors, especially , lack electricity area .

E. Blade with quality steel , a special refining process, super wear-resistant , safety and reliable.

fish feed pellet mill for making floating pellet,fish feed pellet machine

fish feed pellet mill

The Floating fish feed pellet mill can make a lot of kinds of feed pellets for different kinds of animals. fish feed pellet mill can make poultry-fodder, pet-fodder, as well as aquaculture-fodder and fishery feed ,which is also called floating feed.fish feed pellet machine is applied to the pretreatment of the animal fodder ,so as to reduce loss of nutrition ,advance the protein content So the fodder will be digested easier by animals.The poultry-fodder can feed chicken, rabbit, sheep, pig, horse cattles and so on The pet-fodder can feed dogs ,cats, goldfish etc The Fishery-feed can feed the fish , shrimps , crab , eel ,catfish , batrachia and so on.

advantages of fish feed pellet mill

1-Our series fish feed pellet mill machine is working with crew type, thus the final pellet can be floating on the water.
2- it is Mini type, easy operation
3-This feed pellet mill is widely use for producing feed for various kinds animals, like the poultry, livestock and the especially the fish.
4-This pellet machine is adopted cutter positioning spring and cuttting forms, frequency,cut out and dice various different diameter of particles. Thus,it is intermaional advanced.
5-Screw adopts special wear-resisting, high temperature resistant materials after thefirst conditioning heat molding, wear resistant and long lifetime.

floating fish feed pellet mill with capacity 300--500kg/h

introduce of fish feed pellet mill

High capacity floating fish feed pellet mill is one kind of hot sell machine in Europe and Africa. Most of people choose this feed pellet machine to produce the floating pellets for fish. The final pellets can keep a long time above the water from 10-30 hours. We have text the final pellets and take some vedio, if it is necessary, we will send some vedio for you better reference.
We not only offer the feed pelletizing machines, but also the 24 hours technical support for making high quality pellets. What's more, we also will offer extra suit spare parts by free which including sleeve, screw propeller, die and cutter for your better prepare. Welcome to visit our factory and get a better understanding about our fish feed pellet   machine.

Application and features of fish feed pellet mill

1. According to different requirements, variety shapes of high-grade feed pellets for fish, shrimps, dog, cat, etc. 
2.  floating fish feed pellet mill can make different pellet from dia.1.0mm--20mm just by changing the mold.and before starting making pellets, a feed hammer mill is necessary to crush raw materials into powder form
3. Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.

DGP floating fish feed machine

introduction of fish feed machine

The fish feed machine can make many kinds of fodder for different kinds of animals. the fish feed machine can make poultry-fodder, pet-fodder, as well as aquaculture fodder and fishery feed, which is also called floating feed. the fish feed pellet machine is applied to the pretreatment of the animal fodder, so as to reduce loss of nutrition, 
advance the protein ratio, So the fodder will be digested easier by animals.The poultry-fodder can feed chicken, rabbit, sheep, pig, horse cattles and so on The pet-fodder can feed dogs, cats, goldfish etc The Fishery-feed can feed the fish, shrimps, crab, eel, catfish, batrachia and so on.

Floating Fish Feed Machine Application and features

1.According to different requirements, variety shapes of high-grade feed pellets for fish, shrimps .etc can be produced.
2.The finished pellets can keep floating for 3-15 hours without pollution to water.
3.The floating time can be controlled by the puffing degree adjustment.
4.Floating fish feed pellet mill can make pellet from dia.1.0mm-20mm just by changing the mold.
5.Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.
6.High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.before making floating pellets, raw materials have to be crushed into 3--5mm by a feed grinder.

two types floating fish feed pellet mill making feed for kinds of fish

introduction of fish feed pellet mill

The fish feed pellet mill includes dry method and wet method . The feed pellet size can be from 0.9mm to 10mm by changing the moulds. fish feed pellet mill is suitable for making feed for small fish to big fish. 

Because of different raw materials character before into extrusion system for dry method floating fish feed pellet making machine and wet method floating fish feed pellet making machine. For the wet method machine, it is damp, hot soft materials. For dry method , it is hard, cold materials

Advantages of fish feed pellet mill

 1) With different moulds, the fish feed pellet mill machine can produce different diameter food, from 0.9mm to 10 mm. 

The food can meet different stage fish. The food can be floating 24 hours. 

2 ) the fish feed pellet mill can produce different shapes feed for fish, dog, cat etc. 

First, our feed machine include following products:
1 Floating fish feed pellet making machine .mainly for fish and shrimp
2 Pellet machine for poulty,such as chicken,duck etc

Second  
we can design machine according customer's require
we offer abroad install and training for complete pellet machine

300--500kg/h animal poultry feed pellet mill making feed for chicken farm

working process of feed pellet mill

1. Full automatic whole chart flow:crushing--mixing--pelleting--elevating--cooling and sieving--discharging
2.raw material for feed pellet mill like grains,corn,wheat, peanut husk,rice stalk, bone,etc.
3. Pellet size ranged from 2~12mm, just change the mould to make different size of pellets
4. this pellet machine has advantage of small area covering, low consumption,high output, economical, reasonable equipments
5. using feed grinder to crush raw materials into 3--5mm

feed pellet mill advantages:

1. The flat die poultry feed pellet mill is easier to clean than the ring die pellet mill
2. Able to change die and roller faster and easily.
3. Small and lightweight, making small-scale production possible.
4. Visibility. It is possible to view into the chamber when pelletizing, you can solve any problem timely

best mini pellet mill for processing poultry feed pellets for farm

introduce of mini pellet mill

The feed mini pellet mill can produce pellets by rotational die connected with maiul shaft . The mini pellet mill is adopted advanced technology . During the process of producing pellets , you don't need to add warter in material .the pellet mill is one kind of machine drying into and drying out .During producing process , the temperature can reach 75 °C which can kill the germs meanwhile which can not affect the quality of pellets .

mini pellet mill Application:

1.mini pellet mill Machine is widely used for maize straw, peanut shell, rice husk, corncob, cotton seed hull, wheat-straw, sunflower seed shell, sawdust, cotton stalk, weeds, and all kinds of crop straw.

2.Applicable rural breeding farmer and small farms, warren, hennery.

3.Applicable to the bio-bacterial manure, organic fertilizer and compound fertilizer granulation in low temperature, but before pelleting, the raw materials moisture has to be controlled at 15--17%, the raw materials have to be crushed into 3--5mm by a feed shredder.

top china supplier of animal feed pellet mill--flat die pellet mill

information of feed pellet mill

Animal feed pellet mill machine,flat die feed pellet mill machine, raw material for this machine can be the food grain like corn, wheat and the crushed waste from agriculture for example, corn straw, groundnut shell, grass, wheat bran, sawdust, and animal manure and so on, they can be pressed into both feed stuffs for many kinds of animals and biomass fuel, the diameter of the pellet can be 2~12 mm, when processing ,the lower temperature can maintain the nutrition of the products.

Features of feed pellet mill

1. In the process of processing can makes protein concretionary changeability which can enhance nutrition, be absorbed conveniently and kill general microbe,Convenient storage,and Long storage time.

2. The feeding port adopts stainless steel ,high anti- corrosion ability and long service life.

3. the feed pellet making machine has Low noise, low malfunction, strong anti-overload, and continuous production of non-card machines.

4. The pressure roller, templates, high-quality wear-resistant, anti-fatigue Steel.

5.Adopt German vacuum furnace heat treatment manufacturing processing and service life extended by 5-7 times than the other.

ring die animal feed pellet mill for making chicken feed,cattle feed

animal feed pellet mill is mainly used for making crude fiber materials into pellets. The materials can be 
sawdust, rice husk, cotton stalk, cottonseed skins, weeds and crop stalks and other plant wastes, especially low-bonding and unformed materials. the animal feed pellet mill may also be applicable to biological fertilizer, 
organic manure as well as fertilizer for low-temperature granulation.

Features of ring die pellet mill

1.With reasonable technology, high capacity and low energy consumption.the ring die pellet mill can produce 2000-6000 tons mash and pellet feed per shift annually;

2.Modular Structure: The plant is compact, occupies less floor space and has low requirement on the mill tower, and needs low investment in civil works. The containerized modular structure is convenient for assembly and disassembly, facilitates the shipment and installation;

3.Centralized control: the analogue panel is adopted. All machines can be interlocked and safety, alarm device is available. The operation is simple and convenient

ring die wood pellet making machine for china manufacturer

Features of Ring Die Wood Pellet making machine

1. the wood pellet making machine Main drive adopts high accurate gear drive, with an output of about 20% higher than belt drive.
2. The drive part of the machine including motor optimize, the high quality SKF bearings and NAK oil seals ensure high efficient and steady driving with low noise.
3. The imperative feeder device is adopted, which making the machine operate smoothly as the material like wood sawdust, corn, wheat, and rice straw is very light, so they are needed to be pushed into pelletizing chamber by force.
4. the wood pellet mill has Special design of feed conditioner which adopts the frequency-conversion speed regulating control to guarantee wood pellets quality.
5. The ring die is made by international advanced technology, has long service life and ensure smoothly pelletizing and high quality.

specification of wood pellet making machine

1. This pellet machine mainly used for making wood pellets , the pellets used for industry, boiler factories , the machine can be produce φ6.0,φ8.0,φ10.0,φ12.0 pellets.
2. The ring die wood pellet machine adopt imported SKF or NSK bearings, the motor brand is Siemens or china famous Wannan brand .
3. Driven by gear .more strong than by belt, and the capacity 10% higher than by belt .

biomass industrial wood pellet mill for making fuel pellets

wood pellet mill introduction

1. Over 15 years experience and more than 300 turn key pellet lines

2. the wood pellet mill is Widely used for large scope of raw material, such as wood chips,sawdust, straw,grass,rice husk,pasture,palm leaf etc.

3. With magnet and over load protection system, which can protect the machine well during production;

4. The feeder of the wood pellet making machine is variable speed controlled to meet different output requirements and with the special structure, it makes materials conveyed evenly.

5. The imported bearing and oil seal in the main drive to ensure highly-efficiency,stability and durability.


Operating Instructions of Ring Die Wood Pellet Mill

1. Have a better understanding of the pellet mill structure and performance, and strictly follow the operation instructions and professional technical personnels’ guidance.
2. Pay attention to regular maintenance and repair so as to extend the machine service life.
3. The operator should stay at the working area while pellet mill is under running condition.
4. It’s wise to choose appropriate pellet mill according to different raw materials and capacity requirements.

supplying big capacity pellet mill for feed industry with cheap price

1.Application and Characteristics of pellet mill

1.1 SZLH series pellet mill is Ring Type pellet mill, which is applied to both

wood pellet making and feed pellet making.

1.2 The structure of this pellet machine is compact and has beautiful shape,

convenient for installation, operation and maintenance, as well as reliable work.

1.3 we can make different pore diameter ring die according to the customer,

moreover,the customer can select at will according to their own different 

requirements.

Working Principal of pellet mill

before pelleting,we have to use a feed hammer mill and feed mixer machine to 

crush and mix the raw mtaeirals The mixed powder moisture content is

less than 15% goes into the feeding screw from the hopper and obtains suitable 

materials amount through adjusting speed of continuously viable motor. 

Then the mixed powder goes into the conditioner.

mini chaff cutter for home use to make cattle feed

Application of mini chaff cutter

This chaff cutter is mainly used for cutting micro-green, dried corn stalks, rice straw and other forage crops, straw and so on, the family farmed cattle, sheep, horses, deer and other livestock, the ideal helper.

Advantage of mini chaff cutter

this is a mini chaff cutter who has compact structure, small size, light weight; with steel structure, safe, reliable, single-phase power, easy to use, even long grass, and other characteristics suitable for green or dry chaff.

Features of mini chaff cutter

1).With insurance device,safe and reliable.

2).Supporting power can choice motor, diesel engine, tractor , especially lack electricity area, can normal working without electricity,more economical.

3).Thick steel cabinet had chosen for welded to the whole die forming, beautiful and easy, durable.

this mini chaff cutter is mainly used to cut straw,stalk,into small pieces,if you want to crush them into fine powder,you can use feed hammer mill crusher with different final powder.

features and advantages of feed hammer mill crusher machine

Features of feed hammer mill

1.The feed hammer mill chamber is of tear circle shape, effectively eliminating the circular flow in the grinding process and getting higher capacity;

2. The Bottom of feed shredder chamber is fitted with U-shape double grinding structure, further improving the capacity with evener particle size.

3. the feed hammer mill Rotor passes accurate dynamic balancing test, resulting in low equipment noise and smooth running.Both coarse and fine grinding is realized through adjusting the gap between beater and screen.

4. New type S shape coupling directly connecting driving results in big offset travel and effectively avoid the heating of bearing.

5. Beater blade edge is vacuum-welded by special alloy steel, resulting in long service life.

6. when we make animal feed pellet using feed pellet mill,we will use such a feed hammer mill crusher to crush raw materials.


Advantage of feed hammer mill

1, the feed hammer mill  has appearance beautiful, compact structure

2, convenient operation, strong and durable

3, the feed hammer mill has energy efficient and green environmental protection

9FQ type feed hammer mill crusher working principle

feed Hammer mill work on the principle that most materials will crush or pulverize upon impact using the following steps:

Firstly, materials is fed into the feed grinding mill chamber typically by gravity.

The second, the material is struck by ganged hammers (rectangular pieces of hardened steel) which are attached to a shaft which rotates at high speed inside the chamber. The material is crushed or shattered by the repeated hammer impacts, collisions with the walls of the grinding chamber, as well as particle on particle impacts.

The third, perforated metal screens, or bar grates covering the discharge opening of the mill retains coarse materials for further grinding while allowing the properly sized materials to pass as finished product.

home use mini chaff cutter machine operated by electricity

mini chaff cutter information:

mini Chaff cutter mainly used to cut corn straw, wheat straw, rice straw all kinds of crop straw and pasture. These processed materials suitable for breeding cattle and sheep deer horse etc, this machine can also process cotton stalk,branches, bark, and so on, used for straw generation ethanol, paper making and artificial board etc.
electric chaff cutter is a mechanical device for cutting straw or hay into small pieces before being mixed together with other forage and fed to horses and cattle. This aids the animal's digestion and prevents animals from rejecting any part of their food.

mini chaff cutter quality guarantee:
Quality Guarantee Terms: Quality guarantee term is for one year. Malfunctions which are caused by machine-self and quality will be responsible for our manufacturer. Other malfunctions which are caused by operation mistakes, man-made problems, etc will be responsible for clients-self

farm chaff cutter for animal feed to raise cattle,sheep,deer

function of chaff cutter for animal 

this chaff cutter for animal Widely used in grinding processing of granular materials, such as corn, wheat, beans, etc., but also for medicine, alcohol, solvents and other processing industries the use of crushed

features of chaff cutter for animal
1.the Chaff cutter with Steel frame, small in size, light weight, convenient to remove

2.electric chaff cutter Design with safety device, avoid chew knife accident, the machine is safe and reliable.

3.Adopting advanced feeding provender device, unique feeding provender roller device

(already obtained patent), the automatic feeding, conveying chain not winding grass, feed the grass is

smooth, High production efficiency

4.Grass roller drive shaft choose gimbal couplings, compact structure, operating flexible, disassembling

convenient.

5.chaff cutter Power supplying have different choice:

Motor, diesel engine, tractor both are suitable, especially suitable for the area where lack of electric power

straw crusher machine to make feed for cattle

straw Crusher Describe:

This stalk cutting machine can cut fresh or dry stalk , cotton stalk , corn stalk , grass , straw and other agriculture in to small pieces with high capacity , easy to operate and working with low noise

This kind of chaff cutter is also called hay cutter, stalk cutting machine, straw pellet machine which is order to cutting off the various straw and stalks.It is mainly composed of feeding structure, chopping structure, throwing structure, driving structure, running gear,protective device and brackets.

The raw materials can be cornstalk, straw, soybean stem, branch, bark, slab, bamboo, fiber grass stem, sugarcane and so on.

The finished product can be used for breeding, animal husbandry, paper making, methane tank, briquetting, mechanism charcoal, man-made board and so on.

Structure;

the straw crusher machine is made of feed machines, guillotine cutting and throwing bodies, transmission, running gear, protective guard and other machine components.

Working principle of hay cutter:the chaff cutter uses the motor as the powerful engine, then delivery power to spindle. The gear of spindle’s another side can transmiss the adjusted power to cutter’s roller

flat die pellet mill for making livestock feed pellets

Flat Die Pellet Mill
This series of flat die pellet mill can process the oil cake and other mixed waste material to granule at one time. And the feed pellet mill is columned granule feed and have slippery firm. During the process of producing granule, the temperature can almost reach 70—80 centigrade. It can make fecula into paste. The inner granule is cooked and fully penetrated, and is not easy to go moldy and degenerative. Then it can be stored for a long time and improve poultry dainty and assimilation function. It also can shorten the period of feeding, so the flat die pellet mill can efficiently reduce many users’ productive cost.

Feed compounders face daily challenges to produce animal feed him with great and consistent pellet quality,  While maintaining their profitability, with many years of experience working in the feed industry with pellet mill and developed in-depth understanding of feed pelleting and pellet parameters affect the quality of, and experts are assistant compounders to fully optimize their pelleting process.

feed hammer mill crusher to shred corn for pelleting

introduction of feed hammer mill

The feed hammer mill crushing chamber realizes water drop type; unique inlet air way avoids circumfluence phenomenon in the crushing process; equips "U" type hitting groove in the bottom of the crushing chamber, which enhances the output; quick-start full opening operation door, elasticity screen, easy to maintain and replace screen.
Uses import "NSK" bearing to guarantee the service life; The nylon stick coupling drives directly, effectively avoids bearing radiation.
Through dynamic balancing check, the rotor runs more stably, the noise is lower, and the performance is more ideal;
Feed port locates in the top of pulverizer, which can match with each kind of feed mechanisms.

features of feed hammer mill

the feed hammer mill crusher has Reasonable design of grinding chamber,Increasing pass ratio of material

the feed pulverizer machine has Reasonable and safe sieve pressing mechanism,convenient,quick and safe replacing of sieve.

Special design and machined rotor assembly,ensure more smoothly,reliable and safe running.

Main motor and filter system are interlock controlled,ensuring filter bag have good ventilating ability and increase capacity.

Key part adopts imported product,increasing service life,reducing the cost of operation and maintence.

the feed hammer mill crusher is usually used together with feed pellet mill, first to crush raw materials into powder form, then pelleting directly.

animal feed pellet making machine for duck, chicken

feed pellet making machine application

Our feed pellet making machine is appropriate for crude fiber compression forming, such as: maize straw, peanut shell, rice husk, corncob, cotton seed hull, wheat-straw, sunflower seed shell, sawdust, cotton stalk, weeds, etc. all kinds of agricultural straws, house refuse, waste plastic and wastes in factory. the feed pellet making machine is also suitable for raw materials which are difficult to form with low bonding ratio. Furthermore, organic bacterial manure, organic fertilizer and compound fertilizer are applicable to pelletize under low temperature. Now our machines have exported to Austria, Thailand, Italy, Russia, America and so on.We have a wide selection of small pellet machine which you can select from. The machines range from small machine good for producing food stuff to the larger machine that will produce wood pellet. They are also good for most biomass materials. We are able to supply different motor voltages to enable you to use in your country. If electricity is a problem for you why not go for one of our Diesel powered Pellet Machines.

Features of the feed pellet machine :

1. Stable performance,low energy consumption

2. Convenient reparing ans maintenance

3. Low failure rate ,easy operation

4. High pellet forming rate

5. Pellet with high density

feed pellet making machine for family use

Main features of poultry feed pellet making machine:

1, the gear case is made of ferrosteel with high quality, which has little noise and good shock ressistance

2. the feed pellet making machine adopts bevel gear drive, which has higher working efficiency compared with belt transmission and worm gear operated, and also it can avoid the defects of belt creeping and short life.

3. the shell of the feed pellet mill is added into stiffener, which can increase the strength/stiffness of the machine in order to avoid the breaking of the pellet machine mill.

4. The mold and the compression roller is made of high quality alloy steel, whose hardness can reach to 55-60HRC.

5. The mould pore structure is quite fit for making wood pellets

6. Safe electricity control system, which can fully meet the standards of operation.

Advangtages:

the feed pellet mill can make the fullest use of natural resources, have good rigidity, perfect smoothness, long shelf life and standard degree of moistness. The fodder will be nearly cooked during theprocessing which can greatly increase the proportion of take-in nutrition. And reduce the zymolysis time of fertilizers.but before pelleting, the raw materials have to be crushed into powder form with feed hammer mill crusher